Model: LP600
IMPORTANT NOTICE: On ALL Intercomp Product orders, there is a 2 Week lead time before shipping. Please allow sufficent time for your order to process.
The LP600 scale is designed to maximize legal payloads with concern for violations and reduction of maintenance due to overload stress on equipment. Weighing a mere 49lb/22kg, this sturdy, all aluminum, fully electronic, self-contained wheel load scale is capable of weighing loads up to 30,000lbs with an accuracy of ±1%. The scale is fully battery operated and only required infrequent recharging from a 12, 110, or 220 volt power source. A charger is provided. Compact, hand-held infrared remote control enables users to control all functions of the scale from a standing position. Jumbo size 1"/25mm LCD display is readable from 25feet/8 meters and automatically illuminates during use in low-light conditions. For the purpose of obtaining an axle weight, it is possible to interconnect up to 32-LP600 scales. You can view the wheel or total weight of all interconnected scales at any location. Axle and axle group weights can be accumulated by using two or more scales. The scales are linked at the I/O terminal jack with an optional cable. The I/O terminal can also transmit pertinent data to a printer or a display, such as Intercomp's S400HI ultra bright digital display. Also available are optional carrying cases that exceed government specifications.
20 mA current loop data interface Operates on six 1.2 Volt NiCad (standard) or alkaline batteries Battery life: Approximately 1500 charge/discharge cycles Battery duration between charges: Approximately 25 hours of continuous use before the scale shuts itself off. (These numbers are lowered by the use of the lamps or active current loop transmission.) Charging voltage: 11.5 Volts - 14.5 Volts DC. Protection is provided for accidental reversal of the charging connections Charging current starts at 300mA and drops down to 50mA after eight hours Charging time: Eight hours if the batteries are discharged to the point of turning off the scale Accuracy: ±1% Operation: Infrared remote control or pushbutton	NTEP Approved / Legal for Trade

Specifications
Capacity:	20,000lb / 10,000kg
Resolution	10lb / 5kg
Accuracy	±1% of reading static mode (NTEP Class III)
Units	lb, kg
Platform Size	22.4 x 15"
Overall Size	1.5 x 30 x 16"
Output	Axle Totalizing: Transmits weight to another scale for totalizing individual axles, tandem axles or wheel groups Printers: RS232 or RS485 output to interface with a remote printer or display
Power	Self-contained nickel cadmium batteries (standard) or alkalines. Intergral recharger to charge or operate from a 12, 110 or 220 volt power source.

Product Datasheet (.pdf)